Datasheet

TPS62360, TPS62361B
TPS62362, TPS62363
SLVSAU9C –MAY 2011–REVISED NOVEMBER 2012 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
PART NUMBER PACKAGE MARKING PACKAGE DEVICE SPECIFIC FEATURES
(1)
Output Voltage Range Output Voltage Presets
TPS62360
(2)
See PACKAGE CSP-16 V
OUT
= 0.77V to 1.4V, 10mV Steps 1.40V, 1.00V, 1.40V, 1.10V
SUMMARY Section
TPS62361B
(2)
See PACKAGE CSP-16 V
OUT
= 0.5V to 1.77V, 10mV Steps 0.96V, 1.40V, 1.16V, 1.16V
SUMMARY Section
TPS62362
(2)
See PACKAGE CSP-16 V
OUT
= 0.77V to 1.4V, 10mV Steps 1.23V, 1.00V, 1.20V, 1.10V
SUMMARY Section
TPS62363
(2)
See PACKAGE CSP-16 V
OUT
= 0.5V to 1.77V, 10mV Steps 1.20V, 1.36V, 1.50V, 1.00V
SUMMARY Section
(1) Contact the factory to check availability of other output voltage or feature versions.
(2) The YZH package is available in tape and reel. Add R suffix (e.g. TPS62360YZHR) to order quantities of 3000 parts per reel, T suffix for
250 parts per reel (e.g. TPS62360YZHT). For the most current package and ordering information, see the Package Option Addendum at
the end of this document, or visit the device product folder on ti.com.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
VALUE
UNIT
MIN MAX
VIN, AVIN, SW pin –0.3 7 V
EN, VSEL0, VSEL1, SENSE+ –0.3 (V
AVIN
+0.3V) V
Voltage range
(2)
SENSE– –0.3 0.3 V
SCL, SDA –0.3 (V
DD
+0.3V) V
VDD –0.3 3.6 V
Continuous RMS VIN / SW current per Pin
(3)
1275 mA
Operating junction temperature, T
J
–40 150 °C
Temperature range
Storage temperature, T
stg
–65 150 °C
Machine model 200 V
ESD rating
(4)
Charge device model 500 V
Human body model 2 kV
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
(3) In order to be consistent with the TI reliability requirement for the silicon chips (100K Power-On-Hours at 105°C junction temperature),
the current should not continuously exceed 1275mA in the VIN pin and 2550mA in the SW pins so as to prevent electromigration failure
in the solder. See THERMAL AND DEVICE LIFE TIME INFORMATION.
(4) The human body model is a 100-pF capacitor discharged through a 1.5-kΩ resistor into each pin. The machine model is a 200-pF
capacitor discharged directly into each pin.
2 Submit Documentation Feedback Copyright © 2011–2012, Texas Instruments Incorporated
Product Folder Links: TPS62360 TPS62361B TPS62362 TPS62363