Datasheet

TPS62260-Q1, TPS62261-Q1
TPS62262-Q1, TPS62263-Q1
SLVSA16C –AUGUST 2009–REVISED JULY 2012 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
OUTPUT
T
A
PACKAGE
(2)
ORDERABLE PART NUMBER TOP-SIDE MARKING
VOLTAGE
–40°C to 85°C Adjustable TPS62260IDRVRQ1 OEO
1.8 V TPS62261TDRVRQ1 OFE
–40°C to 105°C 1.2 V SON – DRV Reel of 3000 TPS62262TDRVRQ1 OFF
2.5 V TPS62263TDRVRQ1 OFG
–40°C to 105°C Adjustable TPS62260TDRVRQ1 OEO
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
Input voltage range
(2)
–0.3 V to 7 V
Voltage range at EN, MODE –0.3 V to V
IN
+0.3 V, ≤ 7 V
Voltage on SW –0.3 V to 7 V
Peak output current Internally limited
HBM, Human-body model 2000 V
ESD rating
(3)
CDM, Charged-device model 1000 V
MM, Machine model 200 V
T
J
Operating junction temperature –40°C to 125°C
T
stg
Storage temperature range –65°C to 150°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
(3) The human body model is a 100-pF capacitor discharged through a 1.5-kΩ resistor into each pin. The machine model is a 200-pF
capacitor discharged directly into each pin.
DISSIPATION RATINGS
PACKAGE R
θJA
POWER RATING FOR T
A
≤ 25°C DERATING FACTOR ABOVE T
A
= 25°C
DRV 76°C/W 1300 mW 13 mW/°C
RECOMMENDED OPERATING CONDITIONS
MIN NOM MAX UNIT
V
IN
Supply voltage 2 6 V
Output voltage range for adjustable voltage 0.6 VIN V
T
A
Operating ambient temperature TPS62260IDRVRQ1 –40 85 °C
TPS6226XTDRVRQ1 -40 105
T
J
Operating junction temperature –40 125 °C
2 Submit Documentation Feedback Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Link(s): TPS62260-Q1 TPS62261-Q1 TPS62262-Q1 TPS62263-Q1