Datasheet

TPS62230, TPS62231, TPS62232, TPS62233, TPS62234, TPS62235, TPS62236
TPS62237, TPS62238, TPS62239, TPS622310, TPS622311, TPS622312
TPS622313, TPS622314, TPS622315, TPS622316, TPS622317, TPS622318
SLVS941E APRIL 2009REVISED DECEMBER 2010
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
(1)
PACKAGE PACKAGE
FREQUENCY
T
A
PART NUMBER
(2)
OUTPUT VOLTAGE ORDERING
[MHz]
DESIGNATOR MARKING
TPS62230 2.5 V 3 DRY TPS62230DRY GV
TPS62231 1.8 V 3 DRY TPS62231DRY GW
TPS62232 1.2 V 3 DRY TPS62232DRY GX
TPS62239 1.0 V 3 DRY TPS62239DRY OP
TPS622311 1.1V 2 DRY TPS622311DRY PA
TPS622315 1.15V 2 DRY TPS622315DRY RI
TPS62235 1.2V 2 DRY TPS62235DRY OQ
TPS622318 1.25V 3 DRY TPS622318DRY ST
TPS622313 1.3 V 3 DRY TPS622313DRY QF
–40°C to 85°C TPS622314 1.5 V 3 DRY TPS622314DRY QG
TPS62236 1.85V 2 DRY TPS62236DRY OR
TPS622312 2.0 V 3 DRY TPS622312DRY QE
TPS62234 2.1 V 3 DRY TPS62234DRY OH
TPS62238 2.25 V 3 DRY TPS62238DRY ON
TPS622310 2.3 V 3 DRY TPS622310DRY OT
TPS622316 2.7 V 3 DRY TPS622316DRY RJ
TPS622317 2.9 V 3 DRY TPS622317DRY RK
TPS62233 3.0 V 3 DRY TPS62233DRY OG
TPS62237 3.3V 2 DRY TPS62237DRY OS
(1) For detailed ordering information see the PACKAGE OPTION ADDENDUM at the end of this data sheet.
(2) The DRY package is available in tape on reel. Add R suffix to order quantities of 3000 parts per reel, T suffix for 250 parts per reel.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
VALUE UNIT
Voltage at VIN and SW Pin
(2)
–0.3 to 7 V
V
I
Voltage at EN, MODE Pin
(2)
–0.3 to V
IN
+0.3, 7 V
Voltage at FB Pin
(2)
–0.3 to 3.6 V
Peak output current internally limited A
HBM Human body model 2
kV
ESD rating
(3)
CDM Charge device model 1
Machine model 200 V
Power dissipation Internally limited
T
J
Maximum operating junction temperature –40 to 125 °C
T
stg
Storage temperature range –65 to 150 °C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
(3) The human body model is a 100-pF capacitor discharged through a 1.5-k resistor into each pin. The machine model is a 200-pF
capacitor discharged directly into each pin.
2 Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated