Datasheet

Board Layout

www.ti.com

3 Board Layout

This section provides the TPS62230EVM-574 board layout and illustrations.

Board layout is critical for all high-frequency, switch-mode power supplies. Figure 1, Figure 2, and

Figure 3 show the board layout for the TPS62230EVM-574 printed-circuit board. The nodes with high-

switching frequencies and currents are kept as short as possible to minimize trace inductance. High-

impedance inputs to the TPS6223X, such as the Vout pin, have traces that are shielded by ground traces

and planes. Careful attention has been given to the routing of high-frequency current loops, and a single-

point grounding scheme is used. See the data sheet for specific layout guidelines. Input and output

capacitors must be kept as close as possible to the device. A large bulk input capacitor (C13, C23, and

C33) is provided to compensate for impedance in long input leads.

Figure 1. Assembly Layer

TPS62230EVM-574 User's Guide SLVU426A–November 2010–Revised July 2013

Submit Documentation Feedback