Datasheet

EVM Operation
2-3
Setup and Test Results
2.2 EVM Operation
As shown in Figure 2–1, an input power supply and a load must be connected
to the appropriate EVM connectors in order for the EVM to operate. The
absolute maximum input voltage is 7 V. The TPS6220X is designed to operate
with a maximum input voltage of 6 V. Short pins 1–2 on jumper J1 (labeled ON)
to enable the device. Connect a load not to exceed 300 mA to the output of the
EVM.
Figure 2–1. Connection Diagram
5.0–V, 1A
Power Supply 2
Voltmeter
–
+
Load
+
–
300 mA
Oscilloscope
CH2 CH3 CH4CH1