Datasheet

J3
J6
J2
J5
J1
J4
JP2
PWM
MODE
PFM
VIN
GND
VOUT
GND
S+
+
S+
S-
-
S-
TPS62060EVM-663
DC
Power Supply
Load
Oscilloscope
JP1
ON
EN
OFF
Test Configuration www.ti.com
4.1.9 J7 – VOUT (SMA)
This SMA connector is connected to the output voltage of the TPS62060. It can be used to easily analyze
the noise spectrum of the output voltage with a spectrum analyzer. By default, J7 is not assembled on the
EVM.
5 Test Configuration
5.1 Hardware Setup
Figure 2 illustrates a typical hardware test configuration.
Figure 2. Hardware Board Connection
6
TPS62060EVM-663 SLVU396–September 2010
Submit Documentation Feedback
Copyright © 2010, Texas Instruments Incorporated