Datasheet

2-1
Chapter 2
Evaluation With the TPS62020EVM
This chapter details the EVM evaluation process and features. A load is
connected to the output pins Vout and GND, which allows the load current
to be adjusted between 0 A and 0.6 A.
For accurate output voltage and input voltage measurements, it is
important to measure the voltage on the input and output voltage terminals
with a voltmeter connected directly to the input voltage or output voltage
terminals. This eliminates any measurement errors related to voltage drops
along the input and output terminal wires connected to the power supply or
load.
Topic Page
2.1 Enable (EN) Jumper 2-1
2.2 Mode Selection Jumper 2-2