Datasheet

EVM Ordering Information
1-4
Introduction
1.4 EVM Ordering Information
Table 1–2.EVM Ordering Information
EVM Number Description
TPS62000EVM-168 Adjustable output voltage version set to 2.5 V
TPS62007EVM-168 3.3-V Fixed output voltage version
1.5 Setup of the EVMs
It is important to establish all connections to the EVM before the power supply
connected to the EVM is turned on.
1) Connect a power supply (2 V to 5.5 V, depending on the output voltage of
the EVM) to the VIN pin and GND pin.
2) Connect a voltmeter to the VOUT pin and the GND1 pin.
3) Verify that the jumper, EN, is across pin 1 and pin 2.
4) Verify that the jumper, ILIM, is across pin 1 and pin 2.
5) Verify that the jumper, SYNC, is across pin 1 and pin 2.
6) Turn on the power supply and verify the output voltage.