Datasheet

www.ti.com Board Layout, Schematic, and Bill of Materials
Table 2. Bill of Materials (continued)
Count RefDes Value Description Size Part Number MFR
Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted.
All other components can be substituted with equivalent MFG's components.
SLVU253 – February 2009 TPS61220EVM-319 5
Submit Documentation Feedback