Datasheet

2-1
Setup of the EVMs
   
It is important to establish all connections to the EVM before the power supply
for the EVM is turned on.
- Connect a power supply (1.8 V to V
OUT
, depending on the output voltage
of the EVM) to the INPUT header
- Connect a voltmeter to the OUTPUT header
- Verify that all jumpers are set to their desired value (EN, SKIPEN,
LDOEN). Default setting is EN, SKIPEN, and LDOEN to V
BAT
.
- Turn on the power supply and verify the output voltage
Topic Page
2.1 Evaluation With the TPS6112x EVM 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2