Datasheet

   
     
SLVS324A − JULY 2001 REVISED NOVEMBER 2004
21
WWW.TI.COM
APPLICATION INFORMATION
layout and board space
All capacitors should be soldered as close as possible to the IC. A PCB layout proposal for a single-layer board
is shown in Figure 37. Care has been taken to connect all capacitors as close as possible to the circuit to achieve
optimized output voltage ripple performance.
CFLY
CIN
COUT
U1
TPS60400
IN
GND
OUT
Figure 37. Recommended PCB Layout for TPS6040x (top layer)
device family products
Other inverting dc-dc converters from Texas Instruments are listed in Table 5.
Table 5. Product Identification
PART NUMBER DESCRIPTION
TPS6735 Fixed negative 5-V, 200-mA inverting dc-dc converter
TPS6755 Adjustable 1-W inverting dc-dc converter