Datasheet
www.ti.com
ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATINGS
RECOMMENDED OPERATING CONDITIONS
ELECTRICAL CHARACTERISTICS
TPS60251
SLVS767C – APRIL 2007 – REVISED NOVEMBER 2007
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
over operating free-air temperature range (unless otherwise noted)
(1)
VALUE UNIT
V
I
Input voltage range (all pins) – 0.3 to 7 V
MAX Output current limit 650 mA
HBM ESD Rating
(2)
2 kV
CDM ESD Rating
(3)
500 V
MM ESD Rating
(4)
200 V
T
A
Operating temperature range – 40 to 85 ° C
T
J
Maximum operating junction temperature 150 ° C
T
ST
Storage temperature – 55 to 150 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The Human body model (HBM) is a 100-pF capacitor discharged through a 1.5-k Ω resistor into each pin. The testing is done according
JEDECs EIA/JESD22-A114.
(3) Charged Device Model
(4) Machine Model (MM) is a 200-pF capacitor discharged through a 500-nH inductor with no series resistor into each pin. The testing is
done according JEDECs EIA/JESD22-A115.
THERMAL THERMAL T
A
≤ 25 ° C POWER DERATING FACTOR T
A
= 85 ° C POWER
PACKAGE
RESISTANCE, R
θ JC
RESISTANCE, R
θ JA
RATING ABOVE T
A
= 25 ° C RATING
QFN 4 × 4 RTW 57.9 ° C/W 37.8 ° C/W 2.646 W 1.455 W 1.058 W
MIN NOM MAX UNIT
V
I
Input voltage range 3.0 6.0 V
I
O(max)
Maximum output current 230 mA
C
I
Input capacitor 4.7 µ F
C
O
Output capacitor 4.7 µ F
C
1
, C
2
Flying capacitor 1.0 µ F
T
A
Operating ambient temperature – 40 85 ° C
T
J
Operating junction temperature – 40 125 ° C
C
IS(MAX)
Maximum capacitance on IS pin 100 pF
V
I
= 3.5 V, T
A
= – 40 ° C to 85 ° C, R
IS
= 562 k Ω , typical values are at T
A
= 25 ° C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
SUPPLY VOLTAGE
V
I
Input voltage range 3.0 6.0 V
750-kHz Switching in 1.5 × Mode
6.7 mA
(I
MAIN_LED
= 15 mA × 4, I
O
= 60 mA)
I
Q
Operating quiescent current
No switching in × 1 mode (I
O
= 100 µ A) 68 µ A
I
SD
Shutdown current Enable Control Register has 0x00 1.3 µ A
V
UVLO1
UVLO Threshold voltage1
(1)
V
I
falling 2.2 2.4 2.6 V
(1) Shut down charge pump and power stage and keep I
2
C content
2 Submit Documentation Feedback Copyright © 2007, Texas Instruments Incorporated
Product Folder Link(s): TPS60251