Datasheet

Setup of the EVM
2-4
2.3 Setup of the EVM
For proper operation of the EVM, follow these steps:
1) Connect a load to the output (between VOUT and GND) with minimum
R = 417 Ω, for VIN = 2.7 V to 5.5 V
R = 200 Ω, for VIN = 2.95 V to 5.5 V
2) Connect a voltage source (or a battery pack) with the appropriate voltage
between the input (VIN) and ground (GND): 2.7 V to 5.5 V.
3) Enable the device by setting Jumper J1 in the ON position