Datasheet

Layout of the EVM
2-4
2.1 Layout of the EVM
Figure 2–1 and Figure 2–2 show the placement of the components and the lay-
out of the EVM. The components and all signals are exclusively placed on the
top layer of the PC board. To provide optimal performance, the bottom layer
is a solid ground plane (only interrupted by some vias).
Figure 2–2. Placement of the Components
Figure 2–3. Top Layer of the EVM
Table 2–1 and Table 2–2 contain the values and description of all capacitors
and resistors that are placed on the EVM.