Datasheet
I
L
(1.00 A/div)
SW (20.0 V/div)
V
OUT
AC Coupled (100 mV/div)
Timebase (1.00 µs/div)
100 1000 10000 100000 1000000
−60
−40
−20
0
20
40
60
−180
−120
−60
0
60
120
180
Frequency (Hz)
Gain (dB)
Phase (°)
VIN = 5V Gain
VIN = 5V Phase
VIN = 12V Gain
VIN =12V Phase
G006
www.ti.com
Test Setup and Results
4.6 Loop Characteristics
Figure 6 shows the EVM loop-response characteristics. Gain and phase plots are shown for V
IN
voltages
of 5 V and 12 V with load currents of 800 mA and 1.9 A, respectively.
Figure 6. TPS55340EVM-017 Loop Response
4.7 Output Voltage Ripple
Figure 7 shows the EVM output voltage ripple and inductor current ripple. The output current is the rated
full load of 800mA and V
IN
= 5 V. The ripple voltage is measured directly across the output capacitors.
Figure 7. TPS55340EVM-017 V
IN
= 5-V Output Ripple
7
SLVU668A–April 2012–Revised July 2012 TPS55340EVM-017, 5-V to 12-V Input, 24-V Output Boost Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated