Datasheet
SW (20.0 V/div)
V
IN
(5.00 V/div)
V
OUT
(10.0 V/div)
Timebase (2.00 ms/div)
SW (20.0 V/div)
EN (2.00 V/div)
V
IN
(5.00 V/div)
V
OUT
(10.0 V/div)
Timebase (2.00 ms/div)
www.ti.com
Test Setup and Results
Figure 14 shows the shutdown waveforms for the EVM. The input voltage is 5V. The EN goes low and the
output voltage ramps from 24 V to V
IN
. The load is 120 Ω.
Figure 14. TPS55340EVM-017 Power Down With EN
4.11 Powering Up and Down with V
IN
Figure 15 shows the start-up waveforms for the EVM. The input voltage ramps with the input voltage
power supply and EN is tied to V
IN
. V
IN
ramps up, the converter starts switching and the output voltage
ramps to 24 V. The load is 120 Ω.
Figure 15. TPS55340EVM-017 Power Up With V
IN
11
SLVU668A–April 2012–Revised July 2012 TPS55340EVM-017, 5-V to 12-V Input, 24-V Output Boost Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated