Datasheet

Bill of Materials
4-4
Count
-1 Part NumberMFRSIzeDescriptionRef Des-2
9 9
TP1, TP2, TP5,
TP6, TP7, TP8,
TP9, TP12, TP14
Test point, red, 1 mm 0.038″ Farnell 240-345
3 3 TP3, TP13, TP15 Test point, black, 1 mm 0.038″ Farnell 240-333
3 3
TP4, TP10, TP11 Adaptor, 3,5 mm probe clip (or
131-5031-00)
72900 Tektronix 131-4244-00
1
U1
IC< IFET power controller, adj V,
6 A
PWP28 TI TPS54610PWP
1
IC, IFET power controller, adj V,
8 A
PWP28 TI TPS54810PWP
1
U2
IC, tracking synchronous PWM
switcher, 6 A
PWP28 TI TPS54680PWP
1
IC, tracking synchronous PWM
switcher, 8 A
PWP28 TI TPS54880PWP
1 1 — PCB, 3 in × 3 in 0.62 in Any SLVP228
2 2 — Shunt, 100 mil, black 0.100 3M 929950-00
Notes: 1) These assemblies are ESD sensitive, ESD precautions must be observed.
2) These assemblies must be clean and free from flux and all contaminant. Use of no clean flux is not acceptable.
3) These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4) Reference designators marked with an asterisk (**) cannot be substituted. All other componets can be substituted
with equivalent MFG’s components.