Datasheet

V = 20 mV / div (ac coupled)
OUT
PH = 5 V / div
Time = 1 µsec / div
Test Setup and Results
www.ti.com
2.6 Loop Characteristics
Figure 6 shows the TPS54622EVM-012 loop-response characteristics. Gain and phase plots are shown
for V
IN
voltage of 12 V. Load current for the measurement is 1.9 A.
Figure 6. TPS54622EVM-012 Loop Response
2.7 Output Voltage Ripple
Figure 7 shows the TPS54622EVM-012 output voltage ripple. The output current is the rated full load of 6
A and V
IN
= 12 V. The ripple voltage is measured directly across the output capacitors.
Figure 7. TPS54622EVM-012 Output Ripple
8
TPS54622EVM-012, 6-A, SWIFT Regulator Evaluation Module SLVU441AMay 2011Revised September 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated