Datasheet

PACKAGE OPTION ADDENDUM
11 – February – 2011
A
ddendum Page 1
PACKAGING INFORMATION
Orderable Device
Status
(1)
Pack
Type
Pack
Drawing
Pins
Pack
Qty
Eco Plan
(2)
Lead/ Ball Finish
MSL Peak Temp
(3)
TPS54620RGYR ACTIVE VQFN RGY 14 3000
Green
(RoHS & no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TPS54620RGYT ACTIVE VQFN RGY 14 250
Green
(RoHS & no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TPS54620RHLR ACTIVE QFN RHL 14 3000
Green
(RoHS & no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
TPS54620RHLT ACTIVE QFN RHL 14 250
Green
(RoHS & no Sb/Br)
CU NIPDAU Level-2-260C-1 YEAR
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a
new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan -The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) -please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for
all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at
high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and lead frame. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) MSL, Peak Temp. --The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications and peak solder
temperature.
Important Information and Disclaimer: The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy
of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps
to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials
and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not
be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to
Customer on an annual basis.