Datasheet

4.2 Bill of Materials
www.ti.com Schematic and Bill of Materials
Table 5 presents the bill of materials for the TPS54617EVM-414.
Table 5. TPS54617EVM-414 Bill of Materials
Count RefDes Value Description Size Part Number MFR
1 — Shunt, 100-mil, Black 0.100 929950-00 3M
2 C1, C2 22 µ F Capacitor, Ceramic, 6.3V, X5R, 10% 1210 GRM32DR60J22KA0 Murata
1
1 C10 150 pF Capacitor, Ceramic, 50V, NPO, 5% 0603 Std Std
0 C13 Open Capacitor, Interference Suppression, xx µ F, 275 VAC 0.394 inch STD Sanyo
1 C3, C4 100 µ F Capacitor, Ceramic, 6.3V, X5R 1210 C3225X5R0J107M TDK
1 C5 1200 pF Capacitor, Ceramic, 25V, X5R, 10% 0603 Std Std
2 C6, C8 0.047 µ F Capacitor, Ceramic, 25V, X5R, 10% 0603 Std Std
1 C7 2700pF Capacitor, Ceramic, 25V, X5R, 10% 0603 Std Std
3 C9, C11, 0.01 µ F Capacitor, Ceramic, 25V, X5R, 10% 0603 Std Std
C12
2 J1, J4 PTC36SAAN Header, Male 2-pin, 100mil spacing, (36-pin strip) 0.100 inch × 2 PTC36SAAN Sullins
2 J2, J3 ED1609 Terminal Block, 2-pin, 15-A, 5,1mm 0.40" x 0.35" ED1609 OST
1 L1 0.82 µ H Inductor, SMT, 13A, 6.7 m Ω 0.255 × 0.270 inch IHLP2525CZERR82M Vishay
3 R1, R2, R8 10.0 k Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R3 0 Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R4 10 Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R5 27.4 k Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R6 4.99k Resistor, Chip, 1/16W, 1% 0603 Std Std
1 R7 590 Resistor, Chip, 1/16W, 1% 0603 Std Std
4 TP1–TP4 5000 Test Point, Red, Thru Hole Color Keyed 0.100 × 0.100 inch 5000 Keystone
2 TP5, TP6 5006 Test Point, Black, Thru Hole Compact Style 0.125 × 0.125 inch 5006 Keystone
1 TP7 5001 Test Point, Black, Thru Hole Color Keyed 0.100 × 0.100 inch 5001 Keystone
1 U1 TPS54617RUV IC, 3V TO 6V Input, 6A, Small synchronous-buck RUV-34 TPS54617RUV TI
1 — PCB 3" × 3" × 0.062" HPA414 Any
Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Reference designators marked with an asterisk (**) cannot be substituted. All other components can be substituted with equivalent MFR’s
components.
SLVU279 – December 2008 TPS54617EVM-414 6-A, SWIFT™ Regulator Evaluation Module 13
Submit Documentation Feedback