Datasheet

Bill of Materials
4-3
Schematic and Bill of Materials
4.2 Bill of Materials
Table 4–1.TPS54610 EVM Bill of Materials
Count Ref Des Description Size MFR Part Number
— C1, C12 Open 0.394
2 C10, C11 Capacitor, POSCAP, 470 µF, 4 V, 40 mΩ, 20% 7343 (D) Sanyo 4TPB470M
1 C13 Capacitor, ceramic, 1000 pF, 25 V, X7R, 10% 603 Murata GRM39X7R102K25
C14 Open 603
2 C2, C8 Capacitor, ceramic, 0.047 µF, 25 V, X7R, 10% 603 Murata GRM39X7R473K25
1 C3 Capacitor, POSCAP, 220 µF, 10 V, 40 mΩ, 20% 7343 (D) Sanyo 10TPB220M
1 C4 Capacitor, ceramic, 0.1 µF, 25 V, X7R, 10% 603 Murata GRM39X7R104K25
1 C5 Capacitor, ceramic, 68 pF, 50 V, C0G, 5% 603 Murata GRM39C0G680J50
1 C6 Capacitor, ceramic, 6800 pF, 25 V, X7R, 10% 603 Murata GRM39X7R682K25
1 C7 Capacitor, ceramic, 0.012 µF, 50 V, X7R, 10% 603 Murata GRM39X7R123K50
1 C9 Capacitor, ceramic, 10 µF, 10 V, X5R, 20% 1210 Panasonic ECJ-4YB1A106K
1 J1 Terminal block, 2 pin, 6 A, 3,5 mm 0.27 x 0.25 OST ED1514
1 J2 Header, 4 pin, 100 mil spacing, (361–pin strip) 0.100 x 4 Sullins PTC36SAAN
1 J3 Terminal block, 2 pin, 15 A, 5,1 mm 0.40 × 0.35 OST ED1609
1 JP1 Header, 3 pin, 100 mil spacing, (36-pin strip) 0.100 x 3 Sullins PTC36SAAN
1 L1 Inductor, SMT, 4.7 µH, 7.7 A, 12 mΩ 0.76 x 0.52 Coiltronics UP3B-4R7
1 R1 Resistor, chip, 9.76 kΩ, 1/16 W, 1% 603 Std Std
1 R2 Resistor, chip, 3.74 kΩ, 1/16 W, 0.1% 603 Std Std
R3 Open 603
1 R4 Resistor, chip, 10 kΩ, 1/16 W, 0.1% 603 Std Std
1 R5 Resistor, chip, 1.18 kΩ, 1/16 W, 1% 603 Std Std
1 R6 Resistor, chip, 49.9 Ω, 1/16 W, 1% 603 Std Std
1 R7 Resistor, chip, 10 kΩ, 1/16 W, 1% 603 Std Std
–– R8 Open 805
5 TP1–TP4,
TP6
Test point, red, 1 mm 0.038 Farnell 240-345
1 TP5 Adapter, 3.5-mm probe clip (or 131-5031-00) 0.2 Tektronix 131-4244-00
2 TP7, TP8 Test point, black, 1 mm 0.038 Farnell 240-333
1 U1 IC, SWIFTt power controller, adjustable-V, 6 A PWP28 TI TPS54610PWP
1 — PCB, 3 In × 3 In × 0.062 In Any SLVP192
2 — Shunt, 100 mil, black 0.100 3M 929950-00