Datasheet

TPS54394
SLVSBE6B –JUNE 2012–REVISED AUGUST 2013 www.ti.com
ELECTRICAL CHARACTERISTICS
(1)
(continued)
over recommended free-air temperature range, VIN = 12 V (unless otherwise noted)
PARAMETER CONDITIONS MIN TYP MAX UNIT
POWER GOOD
PG from lower VOx (going high) 84%
V
PGTH
PGx threshold
PG from higher VOx (going low) 116%
R
PG
PGx pull-down resistance VPGx = 0.5 V 50 75 110 Ω
Delay for PGx going high 1.5 ms
T
PGDLY
PGx delay time
Delay for PGx going low 2 µs
T
PGCOMPSS
PGx comparator start-up delay PGx comparator wake-up delay 1.5 ms
UVLO
VREG5 rising 3.83
V
UVREG5
VREG5 UVLO threshold V
Hysteresis 0.6
LOGIC THRESHOLDs
V
ENH
ENx H-level threshold voltage 2.0 V
V
ENL
ENx L-level threshold voltage 0.4 V
R
ENx_IN
ENx input resistance ENx = 12 V 225 450 900 kΩ
CURRENT LIMITs
I
OCL
Current limit L
OUT
= 2.2 µH
(3)
3.5 4.7 6.5 A
OUTPUT UNDERVOLTAGE PROTECTION (UVP)
V
UVP
Output UVP trip threshold measured on VFBx 63% 68% 73%
T
UVPDEL
Output UVP delay time 1.5 ms
T
UVPEN
Output UVP enable delay 1.5 ms
THERMAL SHUTDOWN
Shutdown temperature
(3)
155
T
SD
Thermal shutdown threshold °C
Hysteresis
(3)
25
(3) Specified by design. Not production tested.
4 Submit Documentation Feedback Copyright © 2012–2013, Texas Instruments Incorporated
Product Folder Links :TPS54394