Datasheet
Table Of Contents
- FEATURES
- APPLICATIONS
- CONTENTS
- DESCRIPTION
- DEVICE RATINGS
- ABSOLUTE MAXIMUM RATINGS
- RECOMMENDED OPERATING CONDITIONS
- ELECTROSTATIC DISCHARGE (ESD) PROTECTION
- PACKAGE DISSIPATION RATINGS
- ELECTRICAL CHARACTERISTICS
- TYPICAL CHARACTERISTICS
- DEVICE INFORMATION
- BLOCK DIAGRAM
- APPLICATION INFORMATION
- FUNCTIONAL DESCRIPTION
- Voltage Reference
- Oscillator
- Input Undervoltage Lockout (UVLO) and Startup
- Enable and Timed Turn On of the Outputs
- Output Voltage Sequencing
- Soft Start
- Output Voltage Regulation
- Feedback Loop and Inductor-Capacitor (L-C) Filter Selection
- Inductor-Capacitor (L-C) Selection
- Maximum Output Capacitance
- Minimum Output Capacitance
- Modifying The Feedback Loop
- Example: TPS54386 Buck Converter Operating at 12-V Input, 3.3-V Output and 400-mA(P-P) Ripple Current
- Bootstrap for the N-Channel MOSFET
- Light Load Operation
- SW Node Ringing
- Output Overload Protection
- Operating Near Maximum Duty Cycle
- Dual Supply Operation
- Cascading Supply Operation
- Multiphase Operation
- Bypass and FIltering
- Over-Temperature Protection and Junction Temperature Rise
- Power Derating
- PowerPAD Package
- PCB Layout Guidelines
- FUNCTIONAL DESCRIPTION
- DESIGN EXAMPLES
- ADDITIONAL REFERENCES
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Addendum-Page 2
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TPS54386 :
•
Automotive: TPS54386-Q1
NOTE: Qualified Version Definitions:
•
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects