Datasheet
Table Of Contents
- FEATURES
- APPLICATIONS
- CONTENTS
- DESCRIPTION
- DEVICE RATINGS
- ABSOLUTE MAXIMUM RATINGS
- RECOMMENDED OPERATING CONDITIONS
- ELECTROSTATIC DISCHARGE (ESD) PROTECTION
- PACKAGE DISSIPATION RATINGS
- ELECTRICAL CHARACTERISTICS
- TYPICAL CHARACTERISTICS
- DEVICE INFORMATION
- BLOCK DIAGRAM
- APPLICATION INFORMATION
- FUNCTIONAL DESCRIPTION
- Voltage Reference
- Oscillator
- Input Undervoltage Lockout (UVLO) and Startup
- Enable and Timed Turn On of the Outputs
- Output Voltage Sequencing
- Soft Start
- Output Voltage Regulation
- Feedback Loop and Inductor-Capacitor (L-C) Filter Selection
- Inductor-Capacitor (L-C) Selection
- Maximum Output Capacitance
- Minimum Output Capacitance
- Modifying The Feedback Loop
- Example: TPS54386 Buck Converter Operating at 12-V Input, 3.3-V Output and 400-mA(P-P) Ripple Current
- Bootstrap for the N-Channel MOSFET
- Light Load Operation
- SW Node Ringing
- Output Overload Protection
- Operating Near Maximum Duty Cycle
- Dual Supply Operation
- Cascading Supply Operation
- Multiphase Operation
- Bypass and FIltering
- Over-Temperature Protection and Junction Temperature Rise
- Power Derating
- PowerPAD Package
- PCB Layout Guidelines
- FUNCTIONAL DESCRIPTION
- DESIGN EXAMPLES
- ADDITIONAL REFERENCES
www.ti.com
VIN
GND
C1
C10
C6
C7
C5
R2
R3
R9
R8
C16
C17
C14
C11
U1
C13
C18
C19
R5
C12
C15
C8
R6
1
C9
C4
C3
R7
R4
GND
GND
VOUT1
VOUT2
L1
L2
D1
D2
TPS54383 , , TPS54386
SLUS774B – AUGUST 2007 – REVISED OCTOBER 2007
• Locate snubber components (if used) close to the rectifier diode with minimal loop area.
• Locate the BP bypass capacitor very close to the IC; a minimal loop area is recommended.
• Locate the output ceramic capacitor close to the inductor output terminal between the inductor and any
electrolytic capacitors, if used.
Figure 37. Top Layer Copper Layout and Component Placement
Copyright © 2007, Texas Instruments Incorporated Submit Documentation Feedback 31
Product Folder Link(s): TPS54383 TPS54386