Datasheet

Bill of Materials
4-3
Schematic and Bill of Materials
4.2 Bill of Materials
The bill of materials for the SLVP215 is given by Table 4–1.
Table 4–1.SLVP215 Bill of Materials
Count Ref Des Description Size MFR Part Number
1 C1 Capacitor, ceramic, 12 pF, 50 V, NPO, 5% 603 Panasonic ECU-V1H120JCV
1 C11 Capacitor, ceramic, 1 µF, 16 V, X7R, 10% 1206 Panasonic ECJ-3YB1C105K
2 C12, C13 Capacitor, ceramic, 0.1 µF, 25 V, X7R,
10%
603 Panasonic ECJ-2VB1E104K
1 C2 Capacitor, ceramic, 470 pF, 50 V, X7R,
10%
603 Panasonic ECU-V1H471KBV
1 C3 Capacitor, ceramic, 1500 pF, 50 V, X7R,
10%
603 Panasonic ECJ-1VB1H152K
2 C4, C8 Capacitor, ceramic, 10 µF, 10 V, X5R,
20%
1210 Taiyo Yuden LMK325BJ106MN
1 C5 Capacitor, ceramic, 3300 pF, 50 V, X7R,
10%
603 Panasonic ECJ-1VB1H332K
1 C6 Capacitor, ceramic, 0.047 µF, 25 V, X7R,
10%
603 Panasonic ECJ-2VB1E473K
2 C7, C10 Capacitor, polymer aluminum, 150 µF, 6.3 V 62100 Cornell Dubilier ESRE151MO6R
1 C9 Capacitor, ceramic, 1 µF, 10 V, X5R, 20% 603 TDK C1608X5R1A105K
2 J1, J2 Terminal block, 2 pin, 6 A, 3,5 mm 75525 OST ED1514
1 J3 Header, 2 pin, 100 mil spacing, (36 pin
strip)
23100 Sullins PTC36SAAN
1 L1 Inductor, SMT, 1 µH, 8.5 A, 10 mΩ 0.270 sq Vishay IHLP-2525CZ-01
3 R1, R6, R7 Resistor, chip, 10 kΩ, 1/16 W, 1% 603 Std Std
1 R2 Resistor, chip, 36.51 kΩ, 1/16 W, 1% 603 Std Std
1 R3 Resistor, chip, 1.21 kΩ, 1/16 W, 1% 603 Std Std
1 R4 Resistor, chip, 24 Ω, 1/8 W, 1% 1206 Std Std
1 R5 Resistor, chip, 71.5 kΩ, 1/16 W, 1% 603 Std Std
4 TP1, TP3, TP6
TP8
Test point, black, 1 mm 0.038″,
6400″
Farnell 240-333
4 TP1, TP3, TP5
TP9
Test point, red, 1 mm 0.038″,
6400″
Farnell 240-345
1 TP7 Adaptor, 3,5 mm probe clip (or
131-5031-00)
72900 Tektronix 131-4244-00
1 U1 IC PWP20 TI TPS54372PWP