Datasheet

R1
VO = 0.765 1+
R 2
æ ö
´
ç ÷
è ø
www.ti.com Introduction
1 Introduction
The TPS54339E is a single, adaptive on-time, D-CAP2™-mode, synchronous buck converter requiring a
low external component count. The D-CAP2™ control circuit is optimized for low-ESR output capacitors
such as POSCAP, SP-CAP, or ceramic types and features fast transient response with no external
compensation. The switching frequency is internally set at a nominal 600 kHz. The high-side and low-side
switching MOSFETs are incorporated inside the TPS54339E package along with the gate-drive circuitry.
The low drain-to-source on-resistance of the MOSFETs allows the TPS54339E to achieve high
efficiencies and helps keep the junction temperature low at high-output currents. To further enhance
efficiency at light loads, the TPS54339E features pulse skipping eco-mode™ operation. The TPS54339E
dc/dc synchronous converter is designed to provide up to a 3-A output from an input voltage source of 4.5
V to 23 V. The output voltage range is from 0.76 V to 7 V. Rated input voltage and output current range
for the evaluation module are given in Table 1.
The TPS54339EEVM-056 evaluation module circuit is a single, synchronous buck converter providing
1.05 V at 3 A from 4.5-V to 23-V input. This user’s guide describes the TPS54339EEVM-056 performance.
Table 1. Input Voltage and Output Current Summary
EVM Input Voltage Range Output Current Range
TPS54339EEVM-056 V
IN
= 4.5 V to 23 V 0 A to 3 A
2 Performance Specification Summary
A summary of the TPS54339EEVM-056 performance specifications is provided in Table 2. Specifications
are given for an input voltage of V
IN
= 12 V and an output voltage of 1.05 V, unless otherwise noted. The
ambient temperature is 25°C for all measurement, unless otherwise noted.
Table 2. TPS54339EEVM-056 Performance Specifications Summary
Specifications Test Conditions Min Typ Max Unit
Input voltage range (V
IN
) 4.5 12 23 V
Output voltage 1.05 V
Operating frequency V
IN
= 12 V, I
O
= 1.5 A 600 kHz
Output current range 0 3 A
Line regulation I
O
= 1 A +/- 0.3 %
Load regulation V
IN
= 12 V +0.8, - 0.1 %
Overcurrent limit V
IN
= 12 V, L
O
= 2.2 µH 3.5 4.1 5.7 A
Output ripple voltage V
IN
= 12 V, I
O
= 3 A 15 mV
PP
Maximum efficiency V
IN
= 5 V, I
O
= 0.5 A 88 %
3 Modifications
These evaluation modules are designed to provide access to the features of the TPS54339E. Some
modifications can be made to this module.
3.1 Output Voltage Setpoint
To change the output voltage of the EVMs, it is necessary to change the value of resistor R1. Changing
the value of R1 can change the output voltage above 0.765 V. The value of R1 for a specific output
voltage can be calculated using Equation 1.
For output voltage from 0.76 V to 7 V:
(1)
3
SLVU814–November 2012 TPS54339EEVM-056, 3-A, Regulator with Eco-Mode™ Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated