Datasheet

www.ti.com
Additional Design Examples
Example 2: 24-V to 12-V and 24-V to 5-V
++
V
OUT
(5 V/div)
V
IN
= 24 V
I
OUT
= 2 A
T − Time − 10 ns / div
V
OUT
(5 V/div)
V
IN
= 24 V
I
OUT
= 2 A
T − Time − 10 ns / div
TPS54283 , , TPS54286
SLUS749C – JULY 2007 – REVISED OCTOBER 2007
For a higher input voltage, both a snubber and bootstrap resistors are added to reduce ringing on the switch
node and a 30 V schottky diode is selected. A higher resistance feedback network is chosen for the 12 V output
to reduce the feedback current.
Figure 45. 24-V to 12-V and 24-V to 5-V Using the TPS54283
Figure 46. Switch Node Ringing Without Snubber and Figure 47. Switch Node Ringeing With Snubber and
Boost Resistor Boost Resistor
42 Submit Documentation Feedback Copyright © 2007, Texas Instruments Incorporated
Product Folder Link(s): TPS54283 TPS54286