Datasheet

Bill of Materials
4-3
Schematic and Bill of Materials
4.2 Bill of Materials
The bill of materials for the TPS54110EVM−044 is given by
Table 4−1.TPS54110EVM-044 Bill of Materials
Count Ref Des Description Size MFR Part Number
− C1 Capacitor, POSCAP, xx µF, xx V, 20% 7343 (D) Sanyo Optional
− C10 Capacitor, ceramic, xx µF, 6.3 V, X5R, 20% 805 std std
2 C2, C9 Capacitor, ceramic, 10 µF, 6.3 V, X5R, 20% 805 std std
1 C3 Capacitor, 0.047 µF, 25 V, X7R 402 std std
1 C4 Capacitor, 0.1 µF, 16 V, X7R 402 std 6TPC100M
− C5 Capacitor, xx µF, 16 V, X7R 402 std std
1 C6 Capacitor, 1000 pF, 25 V, X7R 402 std std
1 C7 Capacitor, 47 pF, 50 V, X7R 402 std std
1 C8 Capacitor, 560 pF, 50 V, X7R 402 std std
2 J1, J2 Terminal block, 2 pin, 6 A, 3.5 mm 0.27” x 0.25” OST ED1514
1 L1 Inductor, SMT, 1 µH, 2 A, 110 mΩ 0.138 x 0.138 Coilcraft DO3314−102MX
2 R1, R7 Resistor, chip, 10 kΩ, 1/16 W, 1% 402 std std
1 R2 Resistor, chip, 14.7 kΩ, 1/16 W, x% 402 std std
1 R3 Resistor, chip, 1.74 kΩ, 1/16 W, x% 402 std std
1 R4 Resistor, chip, 71.5 kΩ, 1/16 W, 1% 402 std std
1 R5 Resistor, chip, 432 Ω, 1/16 W, 1% 402 std std
1 R6 Resistor, chip, 0 Ω, 1/16 W, 1% 603 std std
5
TP1, TP3,
TP4, TP6,
TP8
Test point, red, 1 mm 0.038” Farnell 240−345
2 TP2, TP7 Test point, black, 1 mm 0.038” Farnell 240−333
1 TP5 Adaptor, 3,5 mm probe clip (or 131−5031−00) 0.2” Tektronix 131−4244−00
1 U1 IC, dc/dc converter, adj, 1.5 A PWP20 TI TPS54110PWP
1 −− PCB, 1.3 In x 2.1 In x 0.062 In Any HPA044
Notes: 1) These assemblies are ESD sensitive. ESD precautions must be observed.
2) These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.
3) These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4) Reference designators marked with an asterisk (**) cannot be substituted. All other components can be substituted.
All other components can be substituted with equivalent MFG’s components.