Datasheet

Inductor Current = 200 mA /div
2 s /divμ
PH = 20 V /div
V
OUT
= 10 mV /div ac coupled
V
OUT
= 20 mV /div ac coupled
2 s /divμ
Inductor Current = 200 mA /div ac coupled
PH = 20 V /div
Test Setup and Results www.ti.com
Figure 9. TPS54061EVM-142 Output Ripple DCM
The TPS54061EVM-142 skip mode output voltage ripple is shown in Figure 10 . The output current is less
than .002A and V
IN
= 24V. The ripple voltage is measured directly across the output capacitors.
Figure 10. TPS54061EVM-142 Output Ripple Skip Mode
8
Evaluation Module for TPS54061 Synchronous Step-Down SWIFT SLVU721–May 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated