Datasheet

VDD

DC Source1

VLDOIN

DC Source2

LOAD

VTT

Configurations

www.ti.com

Figure 3. TPS51206EVM-745 Recommended Test Setup

5 Configurations

All jumper selections must be made prior to applying power to the EVM. Users can configure this EVM per

the following configurations.

5.1 Transient Load Selection

The transient load selection can be set by J6.

Default setting: Jumper shorts on Pin2 and Pin3 of J6 to disable transient load.

Table 2. Transient Load Selection

Jumper Set to Transient Load

1-2 pin shorted Enable

2-3 pin shorted Disable

Using the TPS51206EVM-745, 2-A Peak Sink/Source DDR Termination SLUU515–August 2011

Regulator With VTTREF Buffered Reference for DDR2, DDR3, DDR3L, and

Submit Documentation Feedback

DDR4