Datasheet

TPS51100
SLUS600D APRIL 2004REVISED MAY 2012
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
(1)
VALUE UNIT
VIN, VLDOIN, VTTSNS, VDDQSNS, S3, S5 –0.3 to 6
Input voltage range
(2)
V
PGND –0.3 to 0.3
Output voltage range
(2)
VTT, VTTREF –0.3 to 6 V
T
A
Operating ambient temperature range –40 to 85 °C
T
stg
Storage temperature –55 to 150 °C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.c
(2) All voltage values are with respect to the network ground terminal unless otherwise noted.
THERMAL INFORMATION
TPS51100
THERMAL METRIC
(1)
UNITS
DGQ
10 PINS
θ
JA
Junction-to-ambient thermal resistance 60.3
θ
JCtop
Junction-to-case (top) thermal resistance 63.5
θ
JB
Junction-to-board thermal resistance 51.6
°C/W
ψ
JT
Junction-to-top characterization parameter 1.5
ψ
JB
Junction-to-board characterization parameter 22.3
θ
JCbot
Junction-to-case (bottom) thermal resistance 9.5
.
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
RECOMMENDED OPERATING CONDITIONS
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
IN
Supply voltage 4.75 5.25 V
S3, S5 –0.10 5.25
VLDOIN, VDDQSNS, VTT, VTTSNS –0.1 3.6
Voltage range V
VTTREF –0.1 1.8
PGND –0.1 0.1
T
A
Operating free-air temperature –40 85 °C
2 Submit Documentation Feedback Copyright © 2004–2012, Texas Instruments Incorporated
Product Folder Link(s) :TPS51100