Datasheet

TPS40400
www.ti.com SLUS930B –APRIL 2011– REVISED OCTOBER 2011
Configuration changes can be implemented by changing the value in the Value/Edit box of each parameter.
Most boxes allow direct parameter changes such as voltage or current, but some boxes such as
IOUT_OC_FAULT_RESPONSE provide a pop-up configuration window as shown in Figure 28, and others
provide a pull-down menu. Select the appropriate radio buttons to make the desired changes.
To implement the changes to the device, click on the [Write to Hardware] button. This stores the changes to the
device in volatile memory, so these changes are lost when input power is cycled. To permanently make changes
and commit those changes to non-volatile memory, click on the [Store RAM to Flash] button.
Figure 28. IOUT_OC_FAULT_RESPONE Configuration Window
Copyright © 2011, Texas Instruments Incorporated Submit Documentation Feedback 61
Product Folder Link(s) :TPS40400