Datasheet

K
PWM
V
g
V
c
d
+
V
ref
C
out
L
R
load
V
OUT
R
2
R
1
÷
÷
ø
ö
ç
ç
è
æ
+=
1
2
OUT
R
R
1708.0V
TPS40200-EP
SGLS371A –JANUARY 2007–REVISED JANUARY 2013 www.ti.com
Voltage Setting and Modulator Gain
Since the input current to the error amplifier is negligible, the feedback impedance can be selected over a wide
range. Knowing that the reference voltage is 708 mV, pick a convenient value for R1 and then calculate the value
of R2 from the following formula:
(7)
Figure 31. System Gain Elements
The error amplifier has a DC open-loop gain of at least 60 dB, with a minimum of a 1.5-MHz gain bandwidth
product, which gives the user flexibility with respect to the type of feedback compensation used for this particular
application. The gain selected by the user at the crossover frequency is set to provide an overall unity gain for
the system. The crossover frequency should be selected so that the error amplifier open-loop gain is high with
respect to the required closed-loop gain. This ensures that the amplifier response is determined by the passive
feedback elements.
16 Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: TPS40200-EP