Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATING
RECOMMENDED OPERATING CONDITIONS
TPS40130
SLUS602B – JUNE 2004 – REVISED SEPTEMBER 2005
ORDERING INFORMATION
T
A
PACKAGE PART NUMBER
Plastic TSSOP(DBT)
(1)
TPS40130DBT
(2) (3)
-40°C to 85°C
Plastic QFN (RHB) TPS40130RHB
(1) The DBTpackage is also available taped and reeled. Add an R suffix to the device type (i.e.,
TPS40130DBTR).
(2) The TPS40130DBTRG4 is a lead (Pb) free product, which means that it is compatible with current
RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by
weight in homogeneous material. In addition, this part has NiPdAu plated copper lead frame and is
rated at MSL level 2 at 260°C according to JEDEC 020C Standards.
(3) Release date for the TPS40130DBTRG4 TBD.
over operating free-air temperature range unless otherwise noted
(1)
TPS40130 UNITS
SW1, SW2 -1 to 44
V
Input voltage range BOOT1, BOOT2 -0.3 to V
SW
+ 6.0
All other pins -0.3 to 6.0
Sourcing current RT 200 µA
T
J
Operating junction temperature range -40 to 125 °C
T
stg
Storage temperature -55 to 150 °C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
MIN NOM MAX UNIT
V
IN
Input voltage 3.0 40 V
T
A
Operating free-air temperature -40 85 °C
3
Submit Documentation Feedback