Datasheet

5V
Power
Supply
TPS386000/40EVM
J14
I2C
J33
I/O CONNECTORS AND JUMPERS
U1
TPS386000
or
TPS386040
S1
GNDVIN
MR
PCwithGUI
USBCABLE
U4
TPS65055
J16
USB-GPIO
Adapter
RIBBON
CABLE
I/OCONNECTORS ANDJUMPERS
I/O CONNECTORS AND JUMPERS
-5V
Power
Supply
J3
GND
J1
NEGVDC
Test Setup www.ti.com
5 Test Setup
Figure 4 shows a typical test setup for TPS386000/40EVM.
Figure 4. Typical TPS386000/40EVM Test Setup
6 TPS65055 EVM GUI
6.1 TPS65055 EVM GUI Installation
The TPS65055 EVM Software provides a software interface for the TPS65055 EVM boards. Use this
software to change the TPS65055 IC registers via the USB Interface Adapter. Navigate to the following
link to download the software:
http://focus.ti.com/docs/toolsw/folders/print/tps65055evm-sw.html
6.1.1 Software Requirements
• Microsoft Windows 2000 or Newer Operating System
• Microsoft .Net Framework 2.0
• NOTE: It is advised to install this component independently. This EVM software will attempt to install it
if it's not already installed, but it might require a restart of your system.
• Microsoft Internet Explorer 6
• This is required for receiving automatic updates to the EVM software.
6.1.2
• Personal Computer with USB port
• USB Interface Adapter
10
Evaluation Module for TPS386000 and TPS386040 SLVU341–October 2009
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated