Datasheet
www.ti.com
TPS380 6 I 33 DBV R
Reel
Package
Nominal Supply Voltage
Nominal Threshold Voltage
Functionality
Family
ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATING TABLE
TPS3806J20
TPS3806I33
SLVS393A – JULY 2001 – REVISED NOVEMBER 2004
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated
circuits be handled with appropriate precautions. Failure to observe proper handling and installation
procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
THRESHOLD VOLTAGE
T
A
DEVICE NAME MARKING
V
DD
SENSE
TPS3806J20DBVR
(2)
TPS3806J20DBVT
(3)
1.8 V 1.207 V PGQI
-40 ° C to +85 ° C
TPS3806I33DBVR
(2)
TPS3806I33DBVT
(3)
3 V 1.207 V PGPI
(1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet or refer
to our web site at www.ti.com .
(2) The DBV R passive indicates tape and reel containing 3000 parts.
(3) The DBV T passive indicates tape and reel containing 250 parts.
over operating free-air temperature range (unless otherwise noted)
(1)
TPS3806J20, TPS3806I33 UNIT
Supply voltage, V
DD
(2)
7 V
All other pins
(2)
-0.3 to 7 V
Maximum low-output current, I
OL
5 mA
Maximum high-output current, I
OH
-5 mA
Input clamp current, I
IK
(V
I
< 0 or V
I
> V
DD
) ± 10 mA
Output clamp current, I
OK
(V
O
< 0 or V
O
> V
DD
) ± 10 mA
Continuous total power dissipation See Dissipation Rating Table
Operating free-air temperature range, T
A
-40 to +85 ° C
Storage temperature range, T
stg
-65 to +150 ° C
Soldering temperature +260 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND. For reliable operation, the device must not be continuously operated at 7 V for more than
t = 1000 h.
DERATING FACTOR T
A
= 70 ° C T
A
= 85 ° C
PACKAGE T
A
< 25 ° C ABOVE T
A
= 25 ° C POWER RATING POWER RATING
DBV 437 mW 3.5 mW/ ° C 280 mW 227 mW
2