Datasheet

TPS3700
SBVS187C –FEBRUARY 2012–REVISED MAY 2013 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
PRODUCT DESCRIPTION
yyy is package designator
TPS3700yyyz
z is package quantity
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or visit the
device product folder at www.ti.com.
ABSOLUTE MAXIMUM RATINGS
(1)
Over operating free-air temperature range, unless otherwise noted.
VALUE
MIN MAX UNIT
VDD –0.3 +20 V
Voltage
(2)
V
OUTA
, V
OUTB
–0.3 +20 V
V
INA+
, V
INB–
–0.3 +7 V
Current Output pin current 40 mA
Operating junction, T
J
–40 +125 °C
Temperature
Storage, T
stg
–65 +150 °C
Human body model (HBM) 2 kV
Electrostatic discharge (ESD) rating
(3)
Charge device model (CDM) 500 V
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods my affect device reliability.
(2) All voltages are with respect to network ground terminal.
(3) ESD testing is performed according to the respective JESD22 JEDEC standard.
THERMAL INFORMATION
TPS3700
THERMAL METRIC
(1)
DDC (SOT23) DSE (SON6) UNITS
6 PINS 6 PINS
θ
JA
Junction-to-ambient thermal resistance 204.6 194.9
θ
JCtop
Junction-to-case (top) thermal resistance 50.5 128.9
θ
JB
Junction-to-board thermal resistance 54.3 153.8
°C/W
ψ
JT
Junction-to-top characterization parameter 0.8 11.9
ψ
JB
Junction-to-board characterization parameter 52.8 157.4
θ
JCbot
Junction-to-case (bottom) thermal resistance N/A N/A
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
2 Submit Documentation Feedback Copyright © 2012–2013, Texas Instruments Incorporated
Product Folder Links: TPS3700