Datasheet

www.ti.com
Absolute Maximum Ratings
(1)
Dissipation Rating Table
Recommended Operating Conditions
TPS3307-18 , TPS3307-25 , TPS3307-33
SLVS199C – DECEMBER 1998 – REVISED DECEMBER 2006
Over operating free-air temperature range (unless otherwise noted).
UNIT
Supply voltage, V
DD
(2)
7V
MR pin –0.3V to V
DD
+0.3V
All other pins
(2)
–0.3V to 7V
Maximum low output current, I
OL
5mA
Maximum high output current, I
OH
–5mA
Input clamp current, I
IK
(V
I
< 0 or V
I
> V
DD
) ± 20mA
Output clamp current, I
OK
(V
O
< 0 or V
O
> V
DD
) ± 20mA
Continuous total power dissipation See Dissipation Rating Table
Operating free-air temperature range, T
A
–40 ° C to +85 ° C
Storage temperature range, T
stg
–65 ° C to +150 ° C
Soldering temperature +260 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND. For reliable operation the device must not be operated at 7V for more than t = 1000h
continuously.
T
A
≤ +25 ° C DERATING FACTOR T
A
= +70 ° C T
A
= +85 ° C
PACKAGE
POWER RATING ABOVE T
A
= +25 ° C POWER RATING POWER RATING
DGN 2.14W 17.1mW/ ° C 1.37W 1.11W
D 725mW 5.8mW/ ° C 464mW 377mW
At specified temperature range.
MIN MAX UNIT
Supply voltage, V
DD
2 6 V
Input voltage at MR and SENSE3, V
I
0 V
DD
+ 0.3 V
Input voltage at SENSE1 and SENSE2, V
I
0 (V
DD
+0.3)V
IT
/1.25V V
High-level input voltage at MR, V
IH
0.7 x V
DD
V
Low-level input voltage at MR, V
IL
0.3 × V
DD
V
Input transition rise and fall rate at MR, ∆ t/ ∆ V 50 ns/V
Operating free-air temperature range, T
A
–40 +85 ° C
5
Submit Documentation Feedback