Datasheet

Bill of Materials

www.ti.com

5 Bill of Materials

Table 3. EVM Bill of Materials

Count RefDes Value Description Size Part Number Mfr

1 C2 0.1 µF Capacitor, Ceramic, 16V, X7R, 10% 603 Std Std

1 C1 10 µF Capacitor, Ceramic, 10V, X5R, 10% 1206 Std Std

1 C3 150 µF Capacitor, Tant, Low ESR, 10V, ±10% 7343(D) TPSD157K010R0100 AVX

1 D1 LN1271R Diode, LED, Red, 20-mA, 0.9-mcd 0.068 x 0.049 inch LN1271R Panasonic

4 J3-6 PEC02SAAN Header, Male 2-pin, 100mil spacing, 0.100 inch x 2 PEC02SAAN Sullins

2 R2-3 100k Resistor, Chip, 1/16W, 1% 603 Std Std

1 R4 40.2k Resistor, Chip, 1/16W, 1% 603 Std Std

1 R5 20k Resistor, Chip, 1/16W, 1% 603 Std Std

1 R1 499 Resistor, Chip, 1/10W, 1% 805 Std Std

2 J1-2 ED555/2DS Terminal Block, 2-pin, 6-A, 3.5mm 0.27 x 0.25 inch ED555/2DS OST

2 TP2-3 5010 Test Point, Red, Thru Hole 0.125 x 0.125 inch 5010 Keystone

2 TP4-5 5011 Test Point, Black, Thru Hole 0.125 x 0.125 inch 5011 Keystone

2 TP1 TP6 5012 Test Point, White, Thru Hole 0.125 x 0.125 inch 5012 Keystone

1 U1 TPS2554DRC or IC, Power-Distribution Switch, Current-Limited SON TPS2554DRC or TI

TPS2555DRC TPS2555DRC

4 SJ-5003 BUMPON HEMISPHERE .44X.20 BLACK SJ-5003 3M

2 Shunt, Black 100-mil 929950-00 3M

1 — PCB, 2.5 In x 2.0 In x 0.062 In PWR010 Any

TPS2554 and TPS2555 Evaluation Module SLVU462– June 2011

Submit Documentation Feedback