Datasheet

www.ti.com
7 List of Materials
List of Materials
Table 5. List of Materials for the TPS2412/13
(1) (2) (3) (4)
REF DES COUNT DESCRIPTION MFR PART NUMBER
C1, C2, C7, C8, C9,
6 Capacitor, OSCON, SM, 100 µ F, 20 V, 20%, G-case Sanyo 20SVP100M
C10
C15 1 Capacitor, ceramic, 0.1 µ F, 16 V, X5R, 20%, '0603 STD STD
C17 1 Capacitor, ceramic, 1 µ F, 25 V, X5R, 20%, '0805 Panasonic ECJ2FB1E105M
C18, C19, C20,
7 Capacitor, ceramic, 22 µ F, 25 V, X5R, 20%, '1210 Panasonic ECJ4YB1E226M
C21, C22, C23, C24
C3, C11 2 Capacitor, ceramic, 0.01 µ F, 25 V, X7R, 20%, '0603 STD STD
C4, C12 2 Capacitor, ceramic, 2200 pF, 50 V, X7R, 10%, 0603 STD STD
Header, 2 pin, 100-mil spacing, (36-pin strip), 0.100
J1, J8, J14 3 Sullins PTC36SAAN
inch x 2
J15 1 Terminal block, 2-pin, 6-A, 3.5mm, 0.27 x 0.25 inch OST ED1514
Header, 3 pin, 100-mil spacing, (36-pin strip), 0.100
J2, J9, J13 3 Sullins PTC36SAAN
inch x 3
J3, J4, J5, J7, J10,
6 Screw terminal, 0.310 x 0.310 inch Keystone 7693
J11
MOSFET, N-channel, 30 V, 30 A, R
DS
3 m Ω ,
Q1, Q2, Q3 3 Vishay Si7336ADP
PWRPAK S0-8
R1, R3 2 Resistor, chip, 10 Ω ,1/16 W, 1%, 0603 STD STD
R2, R4 0 Resistor, chip, DNP, 1/16 W, 1%, 0603 STD STD
R5 1 Resistor, power metal strip, 1 Ω , 2 W, 1%, 4527 Panasonic WSR2 1R000 J EA
R6 1 Resistor, chip, 10 Ω , 1/16 W, 1%, 0603 STD STD
R7 1 Resistor, chip, 1 k Ω , 1/16 W, 1%, 0603 STD STD
R8 1 Resistor, chip, 2 k Ω , 1/16 W, 1%, 0603 STD STD
S1 1 Switch, 1P1T, 20 mA, 15 V, 0.240 x 0.256 Panasonic EVQPAC04M
SH1, SH2 2 Short jumper, 0.125 x 0.125 inch
TP1, TP2, TP3,
TP4, TP5, TP6,
TP7, TP9, TP10, 14 Test point, white, thru hole, 0.185 x 0.135 inch Keystone 5012
TP11, TP12, TP13,
TP14, TP15
TP8, TP16, TP17,
5 Test point, SM, 0.150 x 0.090, Keystone 5016
TP18, TP19
U1, U2 2 N+1 and O-Ring Power Rail Controller, TSSOP-8 TI TPS241xPW
(1)
These assemblies are ESD sensitive, ESD precautions shall be observed.
(2)
These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
(3)
These assemblies must comply with workmanship standards IPC-A-610 Class 2.
(4)
Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent
MFG's components.
TPS2412/13 Evaluation Module, HPA22710 sluu267 – January 2007