Datasheet

List of Materials www.ti.com
7 List of Materials
Table 7. HPA204E1 List of Materials
(1) (2) (3) (4)
COUNT RefDes Description Size Part Number
2 C1, C18 Capacitor, ceramic, 25 V, 0.01 μF, X7R, 20% 0603 STD
1 C13 Capacitor, ceramic, 16 V, 0.1 μF, X5R, 20% 0603 STD
0 C14 Capacitor, ceramic, 25 V, X5R, 10% 0603 Do Not Populate (DNP)
1 C17 Capacitor, ceramic, 25 V, 1 μF, X5R, 20% 0805 ECJ2FB1E105M
2 C2, C19 Capacitor, ceramic, 50 V, 2200 pF, X7R, 10% 0603 STD
0 C3, C4, C21, Capacitor, ceramic, 25 V, 1 nF_DNP, X7R, 10% 0603 STD
C22
2 C5, C20 Capacitor, ceramic, 25 V, 100 μF, 100 pF, X7R, 0603 STD
10%
7 C6, C9–C11, Capacitor, OSCON, SM, 100 μF, 20 V, 20% G-Case 20SVP100M
C16, C23, C26
7 C7, C8, C12, Capacitor, ceramic, 25 V, 22 μF, X5R, 20% 1210 ECJ4YB1E226M100M
C15, C24, C25,
C27
6 D1–D3, D6–D8 Diode, LED, green 0.114 × 0.049 inch LN1371G
4 D4, D5, D9, D10 Diode, zener, 4.3 V, 350 mW SOT-23 BZX84C4V3T
0 E1–E6 Pad, TH, DNP 0.038 inch
8 J1, J3, J4, J6, Header, 2 pin, 100-mil spacing, (36-pin strip) 0.100 inch × 2 PTC36SAAN
J9, J13, J15, J17
4 J2, J8, J14, J16 Header, 3 pin, 100-mil spacing, (36-pin strip) 0.100 inch × 3 PTC36SAANl
1 J20 Terminal block, 2 pin, 6 A, 3 mm to 5 mm 0.27 × 0.25 inch ED1514
7 J5, J7, J10–J12, Screw terminal, 30 A 0.470 × 0.470 inch 8196-x
J18, J19
2 Q1, Q8 MOSFET, P-channel, 60 V, 90 mA, 14 Ω SOT23 ZVP3306F0
1 Q14 Trans, P-channel, JFET, -30 V SOT-23 SST270
0 Q15–Q17, MOSFET, N-channel, paceholde SO8 DNP
Q21–Q23
0 Q18–Q20, MOSFET, N-channel, placeholder DPAK DNP
Q24–Q26
4 Q2, Q3, Q9, Q10 MOSFET, N-channel, 100 V, 0.17 A, 6 Ω SOT23 BSS123c
0 Q4, Q5, Q11, MOSFET, N-channel, 30 V, 260 A, 3 mΩ SMD-220 IRL3713SPBF
Q12
3 Q6, Q7, Q13 MOSFET, N-channel, 30 V, 260 A, 3 mΩ SMD-220 IRL3713SPBFV
2 R1, R19 Resistor, chip, 10 Ω, 1/10 W, 5% 0805 STD
4 R12, R13, R31, Potentiometer, 3/8 cermet, single turn, flat, 50 0.375 sq inch 3386P-50K
R32 kΩ
1 R15 Resistor, Power Metal Strip, 1Ω, 5 W, 1% 4527 WSR5 1R0 1% R86
1 R16 Resistor, chip, 10Ω, 1/16 W, 1% 0603 STD
2 R17, R30 Resistor, chip, 1 kΩ, 1/16 W, 1% 0603 STD
1 R18 Resistor, chip, 2 kΩ, 1/10 W, 5% 0603 STD
4 R2, R3, R20, Resistor, chip, 270 Ω, 1/16 W, 1% 0603 STD
R21
0 R4, R22 Resistor, chip, 10 kΩ_DNP, 1/16 W, 1% 0603 STD
8 R5, R6, R10, Resistor, chip, 10 kΩ, 1/16 W, 1% 0603 STD
R11, R23, R24,
R28, R29
(1)
These assemblies are ESD sensitive, ESD precautions shall be observed.
(2)
These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
(3)
These assemblies must comply with workmanship standards IPC-A-610 Class 2.
(4)
Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent
MFG's components.
18
TPS2410 EVM (HPA204) SLVU181A– October 2006– Revised February 2012
Submit Documentation Feedback
Copyright © 2006–2012, Texas Instruments Incorporated