Datasheet

1-1
Introduction
Introduction
The TPS2300 and TPS2301 are new Texas Instruments hot-swap controllers
that eliminate high-frequency hot-plug or hot-removal transients, reduce in-
rush current, and provide overcurrent protection. The evaluation module
(EVM) and interface card can help designers evaluate the devices and simu-
late hot-insertion and hot-removal actions under various conditions.
Users will need at least one dc voltage supply to test the operation of the EVM.
Topic Page
1.1 TPS2300 and TPS2301 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 EVM and Interface Card Schematics 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 Layouts of the EVM and the Interface Card 1-5. . . . . . . . . . . . . . . . . . . . . .
1.4 Setup of the EVM 1-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5 Changeable Components and Test Points on the
Hot-Swap EVM 1-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1