Datasheet

www.ti.com

Test Setup

Figure 4. TPS22966EVM-007 Bottomside

5 Test Setup

5.1 Test Equipment

• Voltage Source:

– 1 Power Source capable of 10V 15A

• Multimeters:

– 2 voltmeters

• Output Loads:

– Electronic Load or Resistor(If testing 6A operation of the switch at 5.5V a 33W power rated resistor

is needed)

• Oscilloscope:

– 4 channel 100MHz

• Signal Generator:

– Dual Channel Preferred

• Recommended Wire Gauge: 18 AWG

SLVU757A–August 2012–Revised March 2013 TPS22966EVM-007 Dual 6A Load Switch

Submit Documentation Feedback