Datasheet

TPS22913
SLVSB20 –SEPTEMBER 2011 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Table 1. Feature List
SLEW RATE QUICK OUTPUT MAXIMUM OUTPUT
DEVICE r
ON
(typ) at 3.3 V ENABLE
(typ) DISCHARGE
(1)
CURRENT
TPS22913A
(2)
63 mΩ 0.1 µs/V Yes 2-A Active High
TPS22913B 63 mΩ 20 µs/V Yes 2-A Active High
TPS22913C 63 mΩ 200 µs/V Yes 2-A Active High
TPS22913D
(2)
63 mΩ 900 µs/V Yes 2-A Active High
(1) This feature discharges the output of the switch to ground through an 150-Ω resistor, preventing the output from floating.
(2) Contact local sales/distributor or factory for availability.
ORDERING INFORMATION
TOP-SIDE MARKING/
T
A
PACKAGE
(1)
ORDERABLE PART NUMBER
STATUS
(2)
–40°C to 85°C YZV (0.5mm pitch) Tape and Reel TPS22913AYZVR Contact factory for availability
–40°C to 85°C YZV (0.5mm pitch) Tape and Reel TPS22913BYZVR _ _ _ _ 64
–40°C to 85°C YZV (0.5mm pitch) Tape and Reel TPS22913CYZVR _ _ _ _ 76
–40°C to 85°C YZV (0.5mm pitch) Tape and Reel TPS22913DYZVR Contact factory for availability
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) Contact factory for details and availability for PREVIEW devices, minimum order quantities may apply.
DEVICE INFORMATION
YZV PACKAGE
TERMINALS ASSIGNMENTS
B ON GND
A V
IN
V
OUT
2 1
PIN FUNCTIONS
TPS22913
PIN NAME DESCRIPTION
YZV
B1 GND Ground
B2 ON Switch control input, active high. Do not leave floating
A1 VOUT Switch output
Switch input, bypass this input with a ceramic capacitor to
A2 VIN
ground
2 Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated
Product Folder Link(s) :TPS22913