Datasheet

Bill of Materials

www.ti.com

9 Bill of Materials

Table 2. Bill of Materials

Count

RefDes Value Description Size Part Number MFR

-001 -002

1 1 — PCB, 0.9 In x 1.7 In x 0.062 In HVL025 Any

0 1 C3 0.1uF Capacitor, Ceramic, 16-V, X7R,10% 603 Std Std

1 0 C2 1uF Capacitor, Ceramic, 10-V, X5R,10% 603 Std Std

0 0 C1, C4 OPEN Capacitor, Ceramic 603 Std Std

0 0 R1 OPEN Resistor, Chip 1/2W 5% 1210 Std Std

0 0 R2 OPEN Resistor, Chip 1/2W 5% 1210 Std Std

12 12 J1-J6, JP1-2, JP4-7 PEC02SAAN Header,2pin, 100mil spacing 0.100 inch x 2 PEC02SAAN Sullins

1 1 JP3 PEC03SAAN Header,3pin, 100mil spacing 0.100 inch x 3 PEC03SAAN Sullins

1 0 U1 TPS22907YZT IC, Single Chip, Current-Limited Load Switch with Controlled YZT TPS22907YZT TI

Turn On

0 1 U1 TPS22908YZT IC, Single Chip, Current-Limited Load Switch with Controlled YZT TPS22908YZT TI

Turn On

1 1 — — Label (See note 5) 1.25 x 0.25 inch THT-13-457-10 Brady

3 3 NA NA Shunt, 100-mil, Black 0.100 929950-00 3M

Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's components.

5. Install label in silk screened box after final wash. Text shall be 8 pt font. Text shall be per Table 1.

Table 1

Assembly Number Text

HVL025-001 TPS22907EVM-025

HVL025-002 TPS22908EVM-025

Using the TPS22907-08EVM-025 Single Channel Load Switch IC SLVU765–October 2012

Submit Documentation Feedback