Datasheet

Schematic and List of Materials

www.ti.com

3.3 List of Materials

Table 5. TPS2113A/5A List of Materials

(1)(2)(3)(4)

-002 -001 RefDes Description PART NUMBER MFR

Capacitor, ceramic, 0.1 µF, 50 V, X&R, 10%, 1206R104K9B20

2 2 C1, C2 Philips

1206 D

293D106X0010B2

1 1 C3 Capacitor, tantalum, 10 µF, 10 V, 20%, 3528 Vishay

Capacitor, tantalum, 100 µF, 10 V, 20%, 7343 293D107X0010D2

3 3 C4, C5, C6 Vishay

(D) T

J1, J2, J3, J4, J5, Header, male 2 pin, 100-mil spacing, 0.100 inch

8 8 PEC02SAAN Sullins

J6, J7, J8 x 2 inch

Terminal block, 2 pin, 6 A, 3.5 mm, 0.27 inch x

3 3 J9, J10, J11 ED555/2DS OST

0.25 inch

1 1 R1 Resistor, chip, 10 kΩ, 1/10 W, 1%, 0805 ERJ-ENCF1002 Panasonic

Potentiometer, 10 kΩ, 0.25 W, 12 turn,

0 1 R2 3266W-1-103 Bourns

top-adjust, 0.25 inch x 0.17 inch

1 1 R3 Resistor, chip, 681 Ω, 1/10 W, 1%, 0805 STD Vishay

Potentiometer, 1 kΩ, 0.25 W 10% , 12 turn,

1 1 R4 3266W-1-102 Bourns

top-adjust, 0.25 inch x 0.17 inch

1 1 R5 Resistor, chip, 392 Ω, 1/10 W, 1%, 0805 STD Vishay

TP1, TP2, TP3,

5 5 Test point, white, 0.250 inch 5012 Keystone

TP4, TP7

2 2 TP5, TP6 Test point, SM, square, 0.185 inch x 0.135 inch 5016 Keystone

0 1 U1 Auto switching power mux, SON-8 TPS2114/5ADRB TI

1 0 U1 Auto switching power mux, SON-8 TPS2114/5ADRB TI

(1)

These assemblies are ESD sensitive, ESD precautions shall be observed.

(2)

These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.

(3)

These assemblies must comply with workmanship standards IPC-A-610 Class 2.

(4)

Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent

MFG's components.

TPS211xADRB EVM, Power Multiplexer Evaluation Module SLUU409–February 2010

Submit Documentation Feedback