Datasheet

Introduction www.ti.com
1 Introduction
The TPS20xxCDRCEVM-016 and TPS20xxCDGNEVM-015 are evaluation modules (EVM) for the Texas
Instruments family of dual-channel, current-limited, power distribution switches. These EVMs operate over
a 4.5-V to 5.5-V range and provide a continuous output current of up to 2 A (see Table 1). Test points
provide convenient access to all critical node voltages.
The TPS20xxCDRCEVM-016 accepts an SON packaged, power-distribution switch whereas the
TPS20xxCDGNEVM-015 accepts MSOP-8 packaged switch with a thermal pad. These switches have an
enable input, fault status output, and overtemperature shutdown.Table 1 and Table 2 summarize the
configurable EVM options. Note that the shaded EVM options shown in these two tables are not currently
available.
2 Schematics and Bill of Materials
2.1 EVM Options
Table 1. TPS20xxCDRCEVM-016 Options
Continuous
EVM Device Output Current ENABLE
(A)
TPS2002CDRCEVM-016 TPS2002CDRC 2 Active Low
TPS2003CDRCEVM-016 TPS2003CDRC 2 Active High
Table 2. TPS20xxCDGNEVM-015 Options
Continuous
EVM Device Output Current ENABLE
(A)
TPS2060CDGNEVM-015 TPS2060CDGN 1.5 Active Low
TPS2062CDGNEVM-015 TPS2062CDGN 1 Active Low
TPS2064CDGNEVM-015 TPS2064CDGN 1.5 Active High
TPS2066CDGNEVM-015 TPS2066CDGN 1 Active High
2
Dual-Channel, Power-Distribution Switch— Evaluation Module SLVU525– September 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated