Datasheet

www.ti.com Board Layout
Figure 7. TPS20xxCDGNEVM-635 Top-Side Layout
Figure 8. TPS20xxCDGNEVM-635 Bottom-Side Layout
3.3 Layout Considerations
The IN and OUT pins of U1 can carry significant current; so, traces to these pins must be of suitable
length and width to minimize the voltage drop to the load. Locate the 0.1-μF bypass capacitors close to
the IN and OUT pins of U1.
9
SLVU466B–June 2011–Revised July 2012 Single-Channel, Power-Distribution Switch Evaluation Module
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated