Datasheet
TPS1101, TPS1101Y
SINGLE P-CHANNEL ENHANCEMENT-MODE MOSFETS
SLVS079C – DECEMBER 1993 – REVISED AUGUST 1995
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
†
UNIT
Drain-to-source voltage, V
DS
– 15 V
Gate-to-source voltage, V
GS
2 or – 15 V
‡
D
p
ackage
T
A
= 25°C ±0.62
‡
V
GS
=27V
D
package
T
A
= 125°C ±0.39
‡
V
GS
= –
2
.
7
V
PW
p
ackage
T
A
= 25°C ±0.61
‡
PW
package
T
A
= 125°C ±0.38
‡
D
p
ackage
T
A
= 25°C ±0.88
‡
V
GS
=3V
D
package
T
A
= 125°C ±0.47
‡
V
GS
= –
3
V
PW
p
ackage
T
A
= 25°C ±0.86
Continuous drain current (T
J
= 150
°
C) I
D
‡
PW
package
T
A
= 125°C ±0.45
A
Contin
u
o
u
s
drain
c
u
rrent
(T
J
=
150°C)
,
I
D
‡
D
p
ackage
T
A
= 25°C ±1.52
A
V
GS
=45V
D
package
T
A
= 125°C ±0.71
V
GS
= –
4
.
5
V
PW
p
ackage
T
A
= 25°C ±1.44
PW
package
T
A
= 125°C ±0.67
D
p
ackage
T
A
= 25°C ±2.30
V
GS
=10V
D
package
T
A
= 125°C ±1.04
V
GS
= –
10
V
PW
p
ackage
T
A
= 25°C ±2.18
PW
package
T
A
= 125°C ±0.98
Pulsed drain current, I
D
‡
T
A
= 25°C ±10 A
Continuous source current (diode conduction), I
S
T
A
= 25°C –1.1 A
Storage temperature range, T
stg
–55 to 150 °C
Operating junction temperature range, T
J
–40 to 150 °C
Operating free-air temperature range, T
A
–40 to 125 °C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 °C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
‡
Maximum values are calculated using a derating factor based on R
θJA
= 158°C/W for the D package and R
θJA
= 176°C/W for the PW package.
These devices are mounted on an FR4 board with no special thermal considerations.
DISSIPATION RATING TABLE
PACKAGE
T
A
≤ 25°C
POWER RATING
DERATING FACTOR
‡
ABOVE T
A
= 25°C
T
A
= 70°C
POWER RATING
T
A
= 85°C
POWER RATING
T
A
= 125°C
POWER RATING
D 791 mW 6.33 mW/°C 506 mW 411 mW 158 mW
PW 710 mW 5.68 mW/°C 454 mW 369 mW 142 mW
‡
Maximum values are calculated using a derating factor based on R
θJA
= 158°C/W for the D package and R
θJA
= 176°C/W
for the PW package. These devices are mounted on an FR4 board with no special thermal considerations.