Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
TPIC1021
LIN Physical Interface
SLIS113C – OCTOBER 2004 – REVISED JULY 2005
over operating free-air temperature range (unless otherwise noted)
PARAMETER RATING UNIT
V
SUP
(2)
Supply line supply voltage (continuous) 0 to 27 V
Supply line supply voltage (transient) 0 to 40 V
NWake DC and transient input voltage (through 33-k Ω serial resistor) -1 to 40 V
Logic pin input voltage (RXD, TXD, EN) -0.3 to 5.5 V
LIN DC input voltage -40 to 40 V
Electrostatic discharge: Human Body Model: LIN pin
(3)
-12 to 12 kV
Electrostatic discharge: Human Body Model: NWake pin
(3)
-9 to 9 kV
Electrostatic discharge: Human Body Model: All other pins
(3)
-3 to 3 kV
Electrostatic discharge: Machine Model: LIN and NWake pins
(4)
-400 to 400 V
Electrostatic discharge: Machine Model: All other pins
(4)
-200 to 200 V
T
A
Operational free-air temperature -40 to 125 °C
T
J
Junction temperature -40 to 150 °C
T
stg
Storage temperature -40 to 165 °C
R
θ JA
Thermal resistance, junction-to-ambient 145 °C/W
Thermal shutdown 200 °C
Thermal shutdown hysteresis 25 °C
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to GND.
(3) The human body model is a 100-pF capacitor discharged through a 1.5-k Ω resistor into each pin.
(4) The machine model is a 200-pF capacitor through a 10- Ω resistor and a 0.75-µH coil.
7